Could I have GEA Test please for my line ?

[#1]

Might depend on time the day the reset takes place . Overnight stats show :

Max:    Upstream rate = 22623 Kbps, Downstream rate = 73766 Kbps

[#2]

It look like your line has been retrain today this afternoon. The banded has been removed off.

Connection stats

adslctl info --stats
adslctl: ADSL driver and PHY status
Status: Showtime
Last Retrain Reason:    0
Last initialization procedure status:   0
Max:    Upstream rate = 17815 Kbps, Downstream rate = 63241 Kbps
Bearer: 0, Upstream rate = 17390 Kbps, Downstream rate = 63304 Kbps
Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
Link Power State:       L0
Mode:                   VDSL2 Annex B
VDSL2 Profile:          Profile 17a
TPS-TC:                 PTM Mode(0x0)
Trellis:                U:ON /D:ON
Line Status:            No Defect
Training Status:        Showtime
                Down            Up
SNR (dB):        6.3             6.3
Attn(dB):        16.0            0.0
Pwr(dBm):        6.8             6.8

Seem I was guessed near right around 63/17 from 74/22 might have been disappointed but it might now waiting game for target SNR 3dB to push the sync rate back up but not alots.

[#3]

Thanks, you were right - it did sync at a lower speed. I'll watch to see if there's the usual change over night. If so I'll give it a few days before rebooting the router.

Worked before and held the higher speed............

[#4]

Try not to reboot - let the DLM do it to reduced snr soon. Remember FTTC do suffer from crosstalk with more users filling up the cabinet. Crosstalk does reduced max data rate.

Only G.fast got Vectoring on it. But, I heard some strange some ECI seeing Vectoring on it (no evidence seen yet) or wait for FTTP (no dlm, no crosstalk ever)