Packet Loss / High latency in evenings

[#1]

@smyth1492  The HUB2 can be set to bridge mode and used as a modem and connected to a router or mesh system that can provide a PPPoE wan connection. Your user credentials would be entered in the router.

I don't use ISP supplied routers so can't help you with the HUB2 setup but there should be info in the router forum board.

[#2]

@smyth1492 

To change the Hub two to bridge mode (as a modem)

http://192.168.1.254 Advanced Setting > Broadband >Internet > Bridging >Enabled. Save settings

The Hub will reboot and the led will go pink.

Use any LAN port to connect to WAN of router.

HTH

[#3]

It looks like my Orbi supports the PPPoE so I should be able to make this change. I just need to come up with a plan for the devices that have a ethernet connection as I don't currently have enough ports available. I might try the change without sorting the ethernet ports out to see if this solves the performance issue or not.