cancel
Showing results for 
Search instead for 
Did you mean: 

How do I check how much data I am using?

G6JPG-0
Rising Star
Posts: 115
Thanks: 20
Registered: ‎27-03-2024

How do I check how much data I am using?

Discussions in the VoIP area (oh: sorry, there isn't one yet) have made me consider mobile alternatives, including for broadband itself.

But I really have no idea how much data I do use (and unlimited data costs more than limited from all mobile suppliers I've looked at); I'm a single-person household, and don't download films or stream much (mainly only when I've missed a "live" programme - maybe half an hour a week of each of video and audio), but I do use YouTube a lot.

So - how do I check my data usage, ideally for each of the last few months? (Weeks? Days?)

I did try to be a good boy, and did battle with both the help (or support) system and the chatbot (and the search system here), but of course didn't get anywhere; searching for "amount of data" or variations on that, of course, generated far too many hits to look through.

I'm fairly sure the information is available, I've just forgotten where to look.

14 REPLIES 14
MisterW
Superuser
Superuser
Posts: 16,210
Thanks: 6,190
Fixes: 447
Registered: ‎30-07-2007

Re: How do I check how much data I am using?

I'm fairly sure the information is available, 

It isnt!. Many years ago, It used to be, but now all the products are Unlimited there's no need for it. 

If you need to know, then you need to record it locally. The Plusnet hub 2 (and Hub 1 I think?) do show somewhere the amount of data since last reset...

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Dan_the_Van
Hero
Posts: 3,084
Thanks: 1,518
Fixes: 90
Registered: ‎25-06-2007

Re: How do I check how much data I am using?

@G6JPG-0 

For the Hub two you can see how much data an individual device has used since it was first connected against the when the Hub was booted.

System uptime can be found here http://192.168.1.254/basic_-_status.htm 

Look in Home >My device found here http://192.168.1.254/basic_-_my_devices.htm 

For each device it will show you uploaded and downloaded amounts

HTH

Edit: The total data sent/received for the period the broadband username has been logged in is found in

Advanced settings >Technical log >Data sent / received:

 

 

greygit1
Aspiring Pro
Posts: 411
Thanks: 56
Fixes: 1
Registered: ‎26-06-2023

Re: How do I check how much data I am using?

"System uptime can be found here http://192.168.1.254/basic_-_status.htm "

Pedant mode.

Only if the hub2 is at default config  (or a config which has the hub at a .254 address) Smiley

 

 

dvorak
Moderator
Moderator
Posts: 29,716
Thanks: 6,593
Fixes: 1,485
Registered: ‎11-01-2008

Re: How do I check how much data I am using?


Moderators Note


This topic has been moved from Broadband to Everything Else

Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
dvorak
Moderator
Moderator
Posts: 29,716
Thanks: 6,593
Fixes: 1,485
Registered: ‎11-01-2008

Re: How do I check how much data I am using?


@G6JPG-0 wrote:

Discussions in the VoIP area (oh: sorry, there isn't one yet) have made me consider mobile alternatives, including for broadband itself.

 


As you struggled to find the right place to post this thread, not sure you'd use that properly if it did exist. 

If you do desperately want a VoIP forum, there's one over at TBB https://forums.thinkbroadband.com/voip.html

Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
G6JPG-0
Rising Star
Posts: 115
Thanks: 20
Registered: ‎27-03-2024

Re: How do I check how much data I am using?

 

For the Hub two you can see how much data an individual device has used since it was first connected against the when the Hub was booted.

System uptime can be found here http://192.168.1.254/basic_-_status.htm 

Look in Home >My device found here http://192.168.1.254/basic_-_my_devices.htm 

Thanks for that. I seem to have done 9.5 G down, 1.2 up in 9 days, 19+ hours, so would probably need a 40G/month or unlimited contract.

I was really looking for something on the PlusNet website (ideally that shows me usage for the past few months) …

For each device it will show you uploaded and downloaded amounts

HTH

Edit: The total data sent/received for the period the broadband username has been logged in is found in

Advanced settings >Technical log >Data sent / received:

… is that what that gets to? I coulnd't find Advanced settings anywhere on the PlusNet website (which irritates me more every time I visit it!).

 

But thanks anyway; looks like I use about 1.2G a day.

MisterW
Superuser
Superuser
Posts: 16,210
Thanks: 6,190
Fixes: 447
Registered: ‎30-07-2007

Re: How do I check how much data I am using?

I was really looking for something on the PlusNet website (ideally that shows me usage for the past few months

there isn't any now! It's the data from tte router or nothing, unless you collect your own...

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Dan_the_Van
Hero
Posts: 3,084
Thanks: 1,518
Fixes: 90
Registered: ‎25-06-2007

Re: How do I check how much data I am using?

@G6JPG-0 

Advanced settings >Technical log >Data sent / received:

It's found on the Hub Two, about half way down just above the broadband username.

Screenshot 2024-06-16 122103.png

The uploaded/downloaded reading resets to zero on a WAN disconnect, either a PPPoE drop for Fibre/Full Fibre or DSL down for Fibre.

 

 

G6JPG-0
Rising Star
Posts: 115
Thanks: 20
Registered: ‎27-03-2024

Re: How do I check how much data I am using?

Thanks for that. Showing 1.1G up, 10.4 down, in 10 days 16+ hours, so still about 1.2G/day. (I think one of the earlier answers in this thread got me to the same data, though this way needed the admin password, which I don't think the earlier one [that gave a couple of links] did.)

Is there anything on the PlusNet website that'll show me what I've used for the past few months, rather than just the current session on my Hub2?

jab1
Legend
Posts: 19,075
Thanks: 6,252
Fixes: 288
Registered: ‎24-02-2012

Re: How do I check how much data I am using?

@G6JPG-0 In a word - no.

John
MisterW
Superuser
Superuser
Posts: 16,210
Thanks: 6,190
Fixes: 447
Registered: ‎30-07-2007

Re: How do I check how much data I am using?

have made me consider mobile alternatives

@G6JPG-0 dont even think about using mobile broadband for Voip!. Many mobile networks use CGNAT and whilst voip might just work, the jitter and latency on most mobile networks will give rubbish call quality

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Jonpe
Hero
Posts: 4,024
Thanks: 1,851
Fixes: 9
Registered: ‎05-09-2016

Re: How do I check how much data I am using?

Your usage pattern seems very similar to mine and my ISP does provide usage stats.  I've never exceeded 89.68 GB (upload+download) in any calendar month during the past four years.  The previous two years, while I was still working, my highest monthly usage (upload+download) was only 28.8GB.

G6JPG-0
Rising Star
Posts: 115
Thanks: 20
Registered: ‎27-03-2024

Re: How do I check how much data I am using?

I wasn't thinking of mobile broadband for VoIP, but as alternative to broadband altogether. (Presumably if I went for more than my present PAYG mobile, I'd get something with X minutes of calls - or, unlimited - via the mobile network anyway.)

At present, no intention of leaving landline broadband or whatever it's called. (I have I think FTTC; don't think I could get FTTP for landlord reasons, but am quite happy with what I have - about 30 speed - anyway.)

G6JPG-0
Rising Star
Posts: 115
Thanks: 20
Registered: ‎27-03-2024

Re: How do I check how much data I am using?

Thanks. Mine seems to be about 1.2G (adding up and down) a day, so I'd probably need at least a 40G package. (I presume if you have a limited package and go over, it doesn't cut off, but you pay by the MB.)

Not planning to change - just covering bases.