cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Bluetooth interference

FIXED
mikepoole
Newbie
Posts: 2
Registered: ‎23-04-2023

Bluetooth interference

‎23-04-2023 3:03 PM

Took delivery of my new PlustNet Two Hub after upgrading to FullFibre - all configured and works fine

I have noticed bluetooth interference in the room my hub is in

Tried disabling the 2.4Ghz channel and only using 5Ghz but still no luck. 

Any thoughts on what I can do?

Message 1 of 3
(799 Views)
0 Thanks
2 REPLIES 2
Baldrick1
Moderator
Moderator
Posts: 12,436
Thanks: 5,601
Fixes: 430
Registered: ‎30-06-2016

Re: Bluetooth interference

Fix

‎23-04-2023 3:21 PM

@mikepoole 

Go into the advanced wireless channels and try a different 2.4 GHz channel. Whilst you can switch off the 2.4 GHz band there is still an unused ‘hidden’ transmission on the 2.4 GHz band transmitting on the same channel. This is used on the BT version of this hub for the mesh backhaul, which is not usable on the Plusnet version. It is expected that this signal will be removed from a future firmware update. The only way to remove this hidden signal is to use the master switch to turn off both wireless bands.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

Message 2 of 3
(791 Views)
0 Thanks
mikepoole
Newbie
Posts: 2
Registered: ‎23-04-2023

Re: Bluetooth interference

‎24-04-2023 8:11 AM

@Baldrick1 

 

Thanks so much! Worked a treat

Message 3 of 3
(730 Views)
0 Thanks