So am trying to setup my Asus RT-AX88U router with the Hub two i switched the hub two to bridge mode and the light shows pink confirming modem only, when to login to the new router CP a message shows which says DCHP not functioning correctly.
I have tried setting DCHP frequency to aggressive mode and no luck, also tried disabling WIFI 6 as i belive to hub two will not support with. Any help will be greatly appreciated.
@KFordnew have you configured the WAN setting on the Asus RT-AX88U for PPPoE and entered your PlsuNet credentials ?
also tried disabling WIFI 6 as i belive to hub two will not support with
When in modem mode the Hub 2 wifi is off , so any wifi setting can be used on the Asus RT-AX88U
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
As @MisterW says everything on the Hub Two is turned off it's now just a modem, you need to connect Hub Two LAN1 2 or 3 to the WAN port of your ASUS router.
your plusnet account details, that you would sign into the member centre with. Username: <pn portal username>@plusdsl.net Password: <pn portla password>
Customer / Moderator If it helped click the thumb If it fixed it click 'This fixed my problem'
