Router

[#1]

Thank you    So how do I get there as it is so small

[#2]

Home>Advanced settings>Technical log

[#3]

Yes Thank you with a dreaded password   I see  Thanks again

[#4]

How about the SNR which was displayed on my Net gear how would I calculate or see ?

[#5]

This (slightly edited for security) is what should show:

Product code:Plusnet Hub Two
Serial number:XX
Firmware version:v0.08.00.08297-PN
Firmware updated:16-Nov-2022
Board version:R01
GUI version:1.9 16_08_2022
DSL uptime:0 Days 6 Hrs 12 Mins
Data rate:5.584 Mbps / 34.976 Mbps
Maximum data rate:5.675 Mbps / 37.731 Mbps
Noise margin:6.1 / 7.2
Line attenuation:11.8 / 21.9
Signal attenuation:11.6 / 19.0
VLAN id:101
Upstream error control:Off
Downstream error control:Off
Data sent / received:74.9 MB Uploaded / 511.1 MB Downloaded
Broadband username:
2.4 GHz wireless network name:
2.4 GHz wireless channel:Smart (Channel11)
5 GHz wireless network name:
5 GHz wireless channel:Smart (Channel36)
Wireless security:WPA2
Wireless mode:Mode 1
Firewall:On
MAC address:XX
Software variant:-
Boot loader:0.1.7-PN (Thu Nov 30 09:45:22 2017)

Add tags

Can you post what you see on that page, edited as above, please?

[#6]

Product code:Plusnet Hub Two
Serial number:XX
Firmware version:v0.08.00.08297-PN
Firmware updated:16-Nov-2022
Board version:R01
GUI version:1.9 16_08_2022
DSL uptime:0 Days 6 Hrs 12 Mins
Data rate:5.584 Mbps / 34.976 Mbps
Maximum data rate:5.675 Mbps / 37.731 Mbps
Noise margin:6.1 / 7.2
Line attenuation:11.8 / 21.9
Signal attenuation:11.6 / 19.0
VLAN id:101
Upstream error control:Off
Downstream error control:Off
Data sent / received:74.9 MB Uploaded / 511.1 MB Downloaded
Broadband username:
2.4 GHz wireless network name:
2.4 GHz wireless channel:Smart (Channel11)
5 GHz wireless network name:
5 GHz wireless channel:Smart (Channel36)
Wireless security:WPA2
Wireless mode:Mode 1
Firewall:On
MAC address:XX
Software variant:-
Boot loader:0.1.7-PN (Thu Nov 30 09:45:22 2017)

[#7]

Yes I can see that but dont want  my settings altered as theey are fine as they were

[#8]

Plusnet Hub Two Manager

Home

Advanced settings

Technical log

Information

Event log

This is a list of your Plusnet Hub settings and current statistics.

Product code:Plusnet Hub Two

Serial number:+108417+2237017087

Firmware version:v0.08.00.08297-PN

Firmware updated:10-Mar-2023

Board version:R01

GUI version:1.9 16_08_2022

DSL uptime:1 Day 14 Hrs 33 Mins

Data rate:799 Kbps / 2.326 Mbps

Maximum data rate:772 Kbps / 2.444 Mbps

Noise margin:4.4 / 2.8

Line attenuation:43.3 / 70.0

Signal attenuation:43.4 / 75.0

VPI/VCI:0/38

Modulation:G.992.5(ADSL2+)

Latency type:Interleaved

Upstream error control:Off

Downstream error control:Off

Data sent / received:1.3 GB Uploaded / 5.1 GB Downloaded

Broadband username:stathe@plusdsl.net

2.4 GHz wireless network name:PLUSNET-37C9RX

2.4 GHz wireless channel:Smart (Channel 11)

5 GHz wireless network name:PLUSNET-37C9RX

5 GHz wireless channel:Smart (Channel 36)

Wireless security:WPA2

Wireless mode:Mode 1

Firewall:On

MAC address:AC:B6:87:9D:6F:FD

Software variant:-

Boot loader:0.1.7-PN (Thu Nov 30 09:4

[#9]

Yes not sure how to copy Where is SNR

[#10]

This is a list of your Plusnet Hub settings and current statistics.

Product code:Plusnet Hub Two

Serial number:+108417+2237017087

Firmware version:v0.08.00.08297-PN

Firmware updated:10-Mar-2023

Board version:R01

GUI version:1.9 16_08_2022

DSL uptime:1 Day 14 Hrs 33 Mins

Data rate:799 Kbps / 2.326 Mbps

Maximum data rate:772 Kbps / 2.444 Mbps

Noise margin:4.4 / 2.8

Line attenuation:43.3 / 70.0

Signal attenuation:43.4 / 75.0

VPI/VCI:0/38

Modulation:G.992.5(ADSL2+)

Latency type:Interleaved

[#11]

---

@stathe wrote:

Yes not sure how to copy Where is SNR

---

this is your SNR: Noise margin:4.4 / 2.8

looks like it is set to 3 which is (I assume) what you want.