cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Using a tp-link AX5400 connected to a Hub 2

paulcarter56
Newbie
Posts: 3
Registered: ‎11-04-2023

Using a tp-link AX5400 connected to a Hub 2

‎11-04-2023 4:49 PM

I've moved from Virgin where I changed their router so I could plug mine into it and use my tp-link for superior WiFi coverage. How do I do this with my Hub 2?
Message 1 of 6
(1,552 Views)
0 Thanks
5 REPLIES 5
MisterW
Superuser
Superuser
Posts: 16,198
Thanks: 6,179
Fixes: 447
Registered: ‎30-07-2007

Re: Using a tp-link AX5400 connected to a Hub 2

‎11-04-2023 4:57 PM

@paulcarter56 Is this an FTTC ( Unlimited Fibre ) or FTTP ( Full fibre ) connection ?

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Message 2 of 6
(1,545 Views)
0 Thanks
paulcarter56
Newbie
Posts: 3
Registered: ‎11-04-2023

Re: Using a tp-link AX5400 connected to a Hub 2

‎11-04-2023 10:23 PM

There's been a delay connecting me but it will be full fibre 145.
Message 3 of 6
(1,505 Views)
0 Thanks
MisterW
Superuser
Superuser
Posts: 16,198
Thanks: 6,179
Fixes: 447
Registered: ‎30-07-2007

Re: Using a tp-link AX5400 connected to a Hub 2

‎12-04-2023 7:57 AM

in that case you dont need the Hub 2 at all. Just connect the WAN port of the AX5400 to the ONT with an Cat5e (or better) cable. Configure the AX5400 WAN connection for PPPoE using your Plusnet username (suffixed with @plusdsl.net) and password.

Job done.

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Message 4 of 6
(1,476 Views)
paulcarter56
Newbie
Posts: 3
Registered: ‎11-04-2023

Re: Using a tp-link AX5400 connected to a Hub 2

‎12-04-2023 4:38 PM

Hi. With my Virgin router I just put it into modem mode and then plugged my tp-link into a certain port. Could I not just do that with the Plusnet router?
Message 5 of 6
(1,455 Views)
0 Thanks
Dan_the_Van
Hero
Posts: 3,072
Thanks: 1,502
Fixes: 90
Registered: ‎25-06-2007

Re: Using a tp-link AX5400 connected to a Hub 2

‎12-04-2023 4:47 PM

Virgin router I just put it into modem mode and then plugged my tp-link into a certain port. Could I not just do that with the Plusnet router?

The Virgin device is a cable modem/router, that is why you turned off the router functions for the tp-link router.

The Openreach ONT is a modem, so no other device is required, as already advised connect the tp-link router to the ONT

Message 6 of 6
(1,448 Views)