cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Using hub two bridging mode- no internet

Martinag
Newbie
Posts: 2
Registered: ‎23-01-2023

Using hub two bridging mode- no internet

‎23-01-2023 10:49 PM

Hi, just switched to plus.net and have a new nighthawk x6 router to use.
I note that hub two can be used in bridging mode so acts as modem only. Although I’m getting no internet at the router (despite plugged in cables between the two.
Not sure where I’m going wrong and can’t find anything about this scenario online
Thanks
Message 1 of 3
(1,022 Views)
0 Thanks
2 REPLIES 2
Baldrick1
Moderator
Moderator
Posts: 12,376
Thanks: 5,559
Fixes: 430
Registered: ‎30-06-2016

Re: Using hub two bridging mode- no internet

‎23-01-2023 10:58 PM


Moderator’s Note

This topic has been moved from Broadband to My Router

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

Message 2 of 3
(1,015 Views)
0 Thanks
Baldrick1
Moderator
Moderator
Posts: 12,376
Thanks: 5,559
Fixes: 430
Registered: ‎30-06-2016

Re: Using hub two bridging mode- no internet

‎23-01-2023 11:10 PM

@Martinag  Welcome to the Community forums.

Set the Hub 2 to bridge mode. You should get a pink light. Connect one of the Hub 2  LAN ports, not the WAN one, to the Netgear WAN input.

Set the Netgear to PPPoE protocol, leave the VLAN blank, enter your Plusnet account username in the form joebloggs@plusdsl.net and your account username.

Let us know how you get on.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

Message 3 of 3
(1,007 Views)