cancel
Showing results for 
Search instead for 
Did you mean: 

One for the future

Baldrick1
Moderator
Moderator
Posts: 12,354
Thanks: 5,539
Fixes: 430
Registered: ‎30-06-2016

One for the future

I have just had some head scratching to try to help an elderly neighbour. She has had a new Sky connection and asked me to get her extension working. This is only used to support her smart TV so there is no other broadband services used.

I popped along with a spare filtered faceplate to be confronted with a conundrum. A relative had got it working for her and the instructions were missing. I eventually worked out that although we are only on an FTTC enabled service that Sky are now using VOIP. In addition the hub has a built in ATA. Consequently analogue phones and extensions have to be connected to the hub ATA output, which was not initially obvious. Due to mechanical constraints it is impossible to simply plug a 'two into one' adapter into the hub and a degree of bodging has had to be used to at least get an upstairs phone working. I have failed to get any information relating to the REN capacity of the ATA from t'Internet, but it works. Interestingly the extension phone currently works when plugged in to the BT master socket until the hub is plugged in. It then dies and the VOIP phone works.

I thought that I would post the experience here in the hope that when Plusnet move over to VOIP that they can be prepared with documentation to help the none telecoms savvy customer manage the change.

 

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

4 REPLIES 4
MisterW
Superuser
Superuser
Posts: 16,190
Thanks: 6,172
Fixes: 446
Registered: ‎30-07-2007

Re: One for the future

Interestingly the extension phone currently works when plugged in to the BT master socket until the hub is plugged in.

@Baldrick1  Interesting , when you say works, to what extent ? just a dial tone or make/receive calls

 

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Baldrick1
Moderator
Moderator
Posts: 12,354
Thanks: 5,539
Fixes: 430
Registered: ‎30-06-2016

Re: One for the future

@MisterW 

To be honest I did not go further than checking that there was a dial tone. This disappeared when I plugged either the DSL  or phone in, I can’t remember which it was.

 

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

RobPN
Seasoned Hero
Posts: 5,229
Thanks: 2,754
Fixes: 13
Registered: ‎17-05-2013

Re: One for the future

@Baldrick1 

Are you/they re-injecting the analogue telephone output from the hubs ATA into the existing house telephone wiring?

If so, I presume you know that the existing copper drop-wire should be isolated/disconnected the from the internal wiring.

Just trying to be helpful (just in case) ...  Wink

Baldrick1
Moderator
Moderator
Posts: 12,354
Thanks: 5,539
Fixes: 430
Registered: ‎30-06-2016

Re: One for the future

@RobPN 

No, the extension was just that, an isolated extension lead. The lash up was a right bodge which I have now resolved by replacing both the old wired phones with a wireless two handset with answering machine and spam call blocker product.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'