HG612 & OPNSense Firewall

[#1]

These are my options

https://i.imgur.com/5qtJ5oC.png

On my Zimma box i have 2 ports 

1. For modem 

2 From Zimma into Switch 

[#2]

Then either leave it as gateway or select router it shouldn't matter as you're not using its wan port

Connect the switch to the zimma. Connect a lan port of the r7800 to the switch . Make sure that dhcp is disabled on the r7800 ( your previous post showed it enabled )

[#3]

HI 

If i check the photos it clearly shows disabled !!

https://i.imgur.com/hXvl3G7.png

[#4]

In that case it should be fine

[#5]

@OsoPolar  Are you sure? The image shows DHCP server enabled.🤔

[#6]

HI

Sorry you have me confused he mentioned it should be disabled but i had it enabled ????

[#7]

@OsoPolar  Where is there any confusion, for use as an Wireless Access point as @MisterW has already stated the R7800 should have DHCP disabled. Your previous posts have shown it as enabled which is incorrect.