However the ethernet connection is very poor indeed to the point of making my PC unusable; ping times of >1000ms are not uncommon and is forever dropping connections.
Very strange, shouldn't be any problem with the wired ports. You're not using port 4 are you ?
I've search the forum for a guide to just using the Hub Two as a wifi router connected, via ethernet, to my Draytek router but can't find a solution.
You can't use it as a wifi 'router' as such, but like most other routers you can use it as a wireless access point.
Basically:-
1) You disable its DHCP server
2) You give it an IP address in the same subnet as your main router , but out of the main routers DHCP range
3) You connect one of its LAN ports ( in the Hub 2 case that's 1 to 3 ) to a LAN port on the main router.
That's it!. Only problem with the Hub 2 is that in this situation its light will constantly flash orange
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
