cancel
Showing results for 
Search instead for 
Did you mean: 

Hub 2 - USB maximum current?

FIXED
timdorrington
Newbie
Posts: 2
Thanks: 3
Registered: ‎02-07-2024

Hub 2 - USB maximum current?

Hi,

I'm hoping to use the USB port at the back of my Hub 2 router as the power source for a VOIP adapter since I'm running out of mains sockets.  Please does anyone know the maximum current that can be drawn from it?

Thanks,

Tim.

11 REPLIES 11
Anunnaki
Aspiring Pro
Posts: 120
Thanks: 45
Fixes: 3
Registered: ‎15-06-2024

Re: Hub 2 - USB maximum current?

Fix

Unless someone knows better, assume that it's 500mA.

Xanadu_2
Grafter
Posts: 26
Thanks: 10
Fixes: 2
Registered: ‎07-02-2018

Re: Hub 2 - USB maximum current?

USB 2.0 - 5V - 500mA

USB 3.0 - 5V - 900mA

Baldrick1
Moderator
Moderator
Posts: 12,318
Thanks: 5,509
Fixes: 429
Registered: ‎30-06-2016

Re: Hub 2 - USB maximum current?

To avoid confusion, the Hub 2 socket is USB2

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

HPsauce
Seasoned Pro
Posts: 7,148
Thanks: 241
Fixes: 4
Registered: ‎02-02-2008

Re: Hub 2 - USB maximum current?

@timdorrington what VOIP device are you planning to use?

I was thinking similarly but the wall-wart (PSU) for my Gigastream N300ip is 6.4v so I didn't bother.

On the other hand my Gigastream handsets only need 4v and charge fine when I use USB power to feed the cradle.

An alternative solution, one I now use a lot, is to replace the mains socket with one that includes USB power outlets, or one with more sockets (though they do normally protrude further from the wall).

HPsauce
Seasoned Pro
Posts: 7,148
Thanks: 241
Fixes: 4
Registered: ‎02-02-2008

Re: Hub 2 - USB maximum current?

Also, just to add that the Gigastream N300ip uses a rare power connector size of 5.5mm external but 3.0mm internal (usually 2.1 or 2.5) and I wasn't prepared to sacrifice the mains charger to cut and splice for a USB-powered test.

RobPN
Seasoned Hero
Posts: 5,229
Thanks: 2,754
Fixes: 13
Registered: ‎17-05-2013

Re: Hub 2 - USB maximum current?

May be of interest, I have a broadly similar Gigaset N510 IP PRO (spotted at a low price on eBay) which can be powered by PoE.  However, the main difference between it and the N300 IP is that it is purely VoIP as it doesn't have a physical landline socket.

 

Edit: Link added

HPsauce
Seasoned Pro
Posts: 7,148
Thanks: 241
Fixes: 4
Registered: ‎02-02-2008

Re: Hub 2 - USB maximum current?

@RobPN As it happens I have an N510 as well, I just haven't installed it yet, the N300 is still connected to my (separate) old POTS landline which weirdly still has dial tone and an assigned number though can neither make or receive calls now.

When I do get round to installing the N510 the N300 will be kept as backup.

RobPN
Seasoned Hero
Posts: 5,229
Thanks: 2,754
Fixes: 13
Registered: ‎17-05-2013

Re: Hub 2 - USB maximum current?

@HPsauce 

Likewise, I'm still using the N300 IP because I still have my BT landline connected to it.

I tested the N510 briefly using PoE when I received it, then put it back in its box for probable future use.

timdorrington
Newbie
Posts: 2
Thanks: 3
Registered: ‎02-07-2024

Re: Hub 2 - USB maximum current?

I'm going with Phonely's VOIP service and will be using their adapter, which is a Fanvil GA11 - both its USB and power adapter ports are marked as 5V DC.

 

Thanks for all your replies - looks like I won't be able to use the USB port on the Hub 2 for powering the VOIP adapter because that's rated at 1A.  Thought it was worth asking though 🙂

HPsauce
Seasoned Pro
Posts: 7,148
Thanks: 241
Fixes: 4
Registered: ‎02-02-2008

Re: Hub 2 - USB maximum current?

@timdorrington It's certainly worth testing the Hub2 USB power supply with your Fanvil GA11. 👍

I just knocked together a USB lead for my spare Gigastream N300ip (nominally 6.4v) and tried it using a "meaty" USB wall-wart, it worked happily on the 5V or so that supplied so I thought, why not and powered it from the Hub2 instead.

All seemed to work fine and I made a test call using it. @RobPN  please note. Didn't leave it connected for more than a few minutes though, we're expecting some important calls later today and I want to be sure our "landline" is working.

When I'm ready to switch to my Gigastream N510 I'll "soak test2 that to see if I can simplify my power socket setup. I do also have a free USB power outlet in a nearby mains outlet, so I have options. Cool

HPsauce
Seasoned Pro
Posts: 7,148
Thanks: 241
Fixes: 4
Registered: ‎02-02-2008

Re: Hub 2 - USB maximum current?

Just to note that I've started my migration from N300ip to N510ipPRO.

Currently the N510 is running via USB from an old basic Apple power supply - 5V/5W and it's working fine. Next step is to try it using the Hub2 and see if both stay stable.

The PSUs for the N300 and N510 are only 6.4V/600mA/3.9W so there's not a huge discrepancy anyway. I'm optimistic. 😎

 

In due course I'll be selling off my spare N300ip, on eBay if I can't find a better way........ 🤔