cancel
Showing results for 
Search instead for 
Did you mean: 

Only 1 device getting full speed

FIXED
Chloesianf
Newbie
Posts: 2
Registered: ‎22-02-2024

Only 1 device getting full speed

I had full fibre installed today, I went for the 500mbps. After the engineer left of course the first thing I did was check the speed, I checked on my phone and it was getting 466mbps. However on any other device, it only seems to be getting 90-100mbps, even if I disconnect my phone. The other devices are another phone and PS5 using Wi-Fi, and a PC using ethernet. For the PC I initially thought it may be due to the cable being quite old, so I have ordered a new one but I don't know if this is going to fix the issue since it's also happening on Wi-Fi devices other than my phone.

Does anyone know what might be happening? And if there's anything I can do to resolve this? Thank you.
6 REPLIES 6
MisterW
Superuser
Superuser
Posts: 16,207
Thanks: 6,187
Fixes: 447
Registered: ‎30-07-2007

Re: Only 1 device getting full speed

Fix

It's possible that your other WiFi devices are connected to the 2.4ghz band ( rather than the 5ghz) which will limit the speed.

As for the ethernet connected device , is the cable a cat5e or better ? If it's only cat5 it will be limited  to 100Mb

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Baldrick1
Moderator
Moderator
Posts: 12,366
Thanks: 5,547
Fixes: 430
Registered: ‎30-06-2016

Re: Only 1 device getting full speed

Moderator's note:
Thread moved from Full Fibre to My Router.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

bobpullen
Community Gaffer
Community Gaffer
Posts: 16,927
Thanks: 5,014
Fixes: 317
Registered: ‎04-04-2007

Re: Only 1 device getting full speed


@MisterW wrote:

It's possible that your other WiFi devices are connected to the 2.4ghz band ( rather than the 5ghz) which will limit the speed.


And the cable will only help if the PC has a GbE ethernet port (or higher) in the first place. If it only has a 10/100 ethernet port then it's not going to matter what cable you use, you'll still max out at ~100mbps.

Bob Pullen
Plusnet Product Team
If I've been helpful then please give thanks ⤵

RealAleMadrid
Aspiring Hero
Posts: 2,847
Thanks: 1,492
Fixes: 61
Registered: ‎07-07-2009

Re: Only 1 device getting full speed

@Chloesianf @MisterW  Rather than the Category of ethernet cable (Cat 5 or 5e) it must have 4 pairs to work at 1Ghz. I have cat 5 patch cables with 4 pairs (i.e. all 8 RJ45 connector pins in use), I also have 2 pair Cat 5e cables that will limit the speed to 100Mbps.

greygit1
Aspiring Pro
Posts: 411
Thanks: 56
Fixes: 1
Registered: ‎26-06-2023

Re: Only 1 device getting full speed

Change 'PC' to 'device'?

Examples. The latest Freesat boxes have 100Mb ethernet. Yealink W70B is 100Mb ethernet.

(Although it is quite likely that this h/w limitation will not impact on current and immediate future performance. Esp VoIP?)

Chloesianf
Newbie
Posts: 2
Registered: ‎22-02-2024

Re: Only 1 device getting full speed

@MisterW
This was exactly the problem!
Found the setting on PS5 to change to 5ghz and that solved the problem there.
The cable was pretty old and second hand so I have no idea what cat it was, but the new one I ordered was cat8 and now we're getting 531mbps on the PC.
The other phone is quite old as well but should still get up to 300mbps, however after a bit of googling we found out it's a DNS issue and there's an app that can fix it, but there's not much point as this phone isn't used for much.